Installation help
Dash Republic units are designed for plug-and-play installation. Most installs take 1 to 2 hours.
What you need
- A plastic trim removal tool set
- A screwdriver and a 10 mm socket (depending on vehicle)
- About 1 to 2 hours
Step by step
- Disconnect the negative battery terminal.
- Remove the dash trim and unscrew the factory radio.
- Unplug the factory connectors and plug them into the supplied harness.
- Connect the GPS antenna, Wi-Fi antenna, microphone and camera if needed.
- Power up and test everything before putting the trim back.
- Fit the new bezel and secure the unit.
Prefer a pro?
Any local car audio or electronics shop can install your unit. Bring the box and harness, it is a standard job for them.
Stuck on a step? Contact us with photos and our team will walk you through it.